TSA5002 - Bluetooth 5.3 Audio Transmitter - I2S digital Input

This is a compact size digital input bluetooth 5.3 audio transmitter board. Maybe your I2S digital output audio player does not have Bluetooth integrated, and you don't want to use cable to connect with our amplifier board. You can use this small device to let your audio player connect with your Bluetooth amplifier board wirelessly. It has a small PCB antenna inside the enclosure. You don't need connect any external antenna.

No need install any drivers. Just connect the I2S signal to the I2S input port. Power it on. It will auto search and connect the Bluetooth receiver. TSA5002 is a I2S slave device. Please make sure your I2S output device are I2S master.

I2S input port:

• SD
• LRCK
• BCLK
• MCLK (No use)
• GND

Pair button:

• Long press 3 seconds into searching mode
• Long press 5 seconds clear the pairing info.

How to pair?

1. Keep your TSA5002 bluetooth transmitter and bluetooth receiver device within 5m. Please make sure the antenna has been installed.
2. Turn on your bluetooth receiver device, keep it in pairing mode
3. Power on your TSA5002 bluetooth transmitter, It will auto reconnect the last paired device. Blue LED slow blink(1Hz).
4. If you failed reconnecting the last paired device, you can try to search and connect the new Bluetooth device nearby. Bluetooth LED fast blinks.
5. New Bluetooth device connected. Blue LED stay on.

If TSA5002 failed to find the new Bluetooth device. Blue LED slow blinks (2Hz). Please check your Bluetooth receiver and make sure it's in pairing mode.

Note:

• This Bluetooth audio transmitter can work with our Bluetooth audio amplifier boards perfectly.

Features:

• Bluetooth v5.3 specification support
• I2S digital input
• Sampling Rate: 48KHz
• Bit per Sample: 16 bit, 24bit, 32bit.
• aptX, aptX Low Latency, aptX HD, SBC and AAC
• Bluetooth protocol: A2DP
• QTIL's proximity pairing and QTIL's proximity connection
• Dimensions: 41x56.5x20mm
• Power consumption: 6mA@5V
• Weight: 19g

Shipping list:

• 1 x TSA5002 audio transmitter
• 1 x JST XH Jumper 2 Wire -2.0mm
• 1 x JST XH Jumper 5 Wire -2.0mm